NDS Smart Inverter Pure Sine Wave: 12V / 600W



£188.03 ex VAT

  More stock due shortly


NDS Smart-In Puresine inverters are built to high standard of safety, efficiency and relaibility. Both input and output are isolated helping to avoid damage to the inverter or the appliance connected if there is a power problem. The connecters are fitted directly onto the board which reduces voltage loss and help with minimise power consumption from your batteries even when left in standby. 

Recommended Fuse and holder for installation

C9732D - 70a MIDI FUSE


More Information


Manufacturer's product code:SP600-12
Cable supplied:80cm 10mm2
Nominal operating Voltage - Volts:12
Output voltage - Volts:230
Input connection:8mm connection (Hard Wired)
Output connection:Single UK socket
USB socket:Yes - 2.1A
Output wave form:Pure sine wave
Continuous output - Watts:600
Peak output (for a few seconds) - Watts:1500
Efficiency - %:91
Remote control facility:Yes - C7685A
Protection:Soft start, Protection against overload and short circuit, Low battery alarm, Protection against polarity inversion and overtemperature
Priority switch function:No
Certification:e marked
Dimensions (L x W x H) - mm:244.5 x 140 x 71
Item in Kg:1.88
Warranty - years:2

What's in the box

  • 1 x inverter
  • spare replacement fuse
  • 1 x 10mm2 80cm positive cable
  • 1 x 10mm2 80cm negative cable
  • 1 x user manula

Customer Questions

Asked by Keith

I am hoping to purchase the NDS 12v/600wt pure sinewave inverter. C7681. In addition I also require the remote switch and fuse holder plus fuse. My question is :- we are about to purchase two electric bikes to take away with our motorhome. We are hoping to recharge the batteries via the inverter as we don't normally use mains hookup as we travel and move around a lot. We have 210 watts of solar panel x 2 110 ah leisure batteries. ( Road Pro) We would not be using the inverter for any other purpose. The bike will have the Bosch Standard charger which charges at 4amp . The batteries are 36v, Energy 500watts Capacity 13.4 ah. My concern is not to purchase an inverter that is unnecessarily power hungry and flatten the batteries. Are you able to advise on that and supply the kit as required? 600 about right? Thanks Regards Keith.

Answered by Allen Jenner at RoadPro on May 21st, 2018

Hello Keith,

600W would be sufficent for your requirements, it's possible 400W woud work, but we'd not recoemmend it.

Please contact us on 01327 312 233 to place your order.


You May Also Need

Sign up to our newsletter
Join in, Follow, Watch