TESA Auto-Lift 4 Levelling System

J2401

£3196.00

£2663.33 ex VAT

  In Stock

Description

The Autolift system is driven by an electronic control unit for self levelling of your vehicle, the actuators can also be controlled manually but is done so in pairs i.e. front pair, back pair, left or right side.

The control unit has built in safety features to prevent accidental descent of the actuators whilst the vehicle is in motion and to prevent driving with them down.

When not in use the actuators fold up horizontally under the motorhomes chassis which helps reduce the overall dimensions of the unit.

The system can be either used via the in-vehicle control or via remote

 

For more information please click here

Specifications

PRODUCT CODE:J2401
MANUFACTURER:Tesa
Voltage:12V
Amp Rating:12A
Maximum load - kg:5000
Nett weight - kg:48
Warranty period:3

What's in the box

  • 4 x actuators
  • 1 x prewired control unit
  • 1 x fixed control panel
  • 1 x remote
  • 4 x Jack pads and positioning rod

Customer Questions

Asked by Stephen

While realising this is a little like asking how long is a piece of string, how much power does this system use to level a motorhome? While the system would be convenient, it would be little use if drains the battery! We have an Autotrail Delaware 'S' with a maximum weight of 4,500Kg. When on the weighbridge, fully laden, the axle weights were Front: 1830Kg, Rear: 2370Kg (Total 4,200Kg). Do you have an idea of the power required to lift the front by 4 inches for example? I assume the power is taken from the leisure batteries? (We have the factory fitted 2x95Ah AGM batteries fitted but we are considering changing to Lithium when these expire.) The vehicle is Fiat based with an ALCO chassis. How much would you charge to fit this system? Many thanks. Steve

Answered by Allen Jenner at RoadPro on January 30th, 2019

Hello Steve,

Thank you for your enquiry.

The length of a piece of string, is twice the distance of one end to the middle.

The TESA lift uses 12A per hour, per jack to lift 1,000kg so at 4,500Kgs it would use approximately 3.6 Amps to level your van.  

Which I am sure you'll agree is quite impressive, and easier to answer than how long the string is.

We''ll need some more information to quote accuratley for the fitting, please contact us on installations@roadpro.co.uk

 

 


Asked by Nicholas

Does this system allow you to tilt the van to enable emptying of water tanks etc. ?

Answered by Allen Jenner at RoadPro on June 10th, 2019

Yes the system can be used for this purpose and others such as changing a flat tyre

 


Asked by John

1. Is this transferable should I change my vehicle. 2. How long would you take to fit the system. 3. Is the system safe to allow working under the vehicle

Answered by Andrew Harris at RoadPro on September 12th, 2019

1) It depends on the new vehicle but, as a rule, we would not recommend this.

2) One day, possibly 1.5 days depending on the vehicle.

3) Probably, but that's not what it's designed for.

 


Asked by Steven

sir, 1. What is the cost of supply and fitting of of the Tesa Automatic Levelling System ? 2. Can this system handle a 5 tonne tag-axle motorhome ? 3. Are there any limitations on the system - ie : can the system be used on grass (Feet/stands appear very small compared with hydrollic lifts ? 4. What is the maximum lift height of the system ? 5. Is this system fitted at the Roadpro premises (albeit by a Tesa technitian) ? Your assistance is apricated. steve. (Kent).

Answered by Andrew Harris at RoadPro on February 03rd, 2020

Hello Steve. Here are the answers:

1)   £3,495.00 including installation

2)   Yes

3)   Yes and plastic pads are supplied that can be used on soft ground

4)   Maximum extension is 420mm

5)   We have installers around the country including Mercury RV in Teynham, Kent and S&G Leisure near Luton.

Hope this helps, Andy

 


You May Also Need

£299.00
£299.00
£299.00
£299.00
£299.00
£299.00
Sign up to our newsletter
Shop by Brand
Join in, Follow, Watch