CTEK Battery Management

CTEK was one of the first companies to introduce "smart" battery chargers and they are now the market leader in high-quality chargers all over the world. As well as 240V chargers, CTEK also design and produce a range of integrated solutions for which RoadPro is CTEK's UK distributor. Integrated solutions means chargers which are built into vehicles and these include battery-to-battery chargers such as the DUAL D250SE and the Smartpass.
RoadPro supplies these products to motorhome and campervan dealers as well as specialist manufacturers. For information on buying CTEK products for your business, send us an email.

CTEK D250SE Dual DC-DC Charger
PRODUCT CODE: | C8664B |
---|---|
Manufacturer's product code: | 40-315 |
MANUFACTURER: | CTEK |
What's in the box: | 1 x Unit with wired temperature sensor |
Suitable for use with smart alternators?: | Yes |
Input Voltage - Volts: | 11.5 / 23 |
Output voltage - Volts: | Max 14.4V (14.7V in AGM mode) |
Max. charging current - Amps: | 20 |
BACK CURRENT DRAIN: | Less than 1Ah/month |
Battery Temperature Sensor: | YES |
Charging Ports: | 1 |
Input from alternator - V: | 11.5v TO 23v |
Input from solar panel - V: | 11.5V to 23V |
Conventional alternator cut-in: | >13.1V, for 5 sec. (engine running, alternator charging) |
Conventional alternator cut-out: | <12.8V, for 10 sec. (engine running, alternator not charging) or service battery voltage > starter battery voltage |
Smart alternator cut-in V: | >11.8V, for 5 sec. (engine running, alternator charging) |
Smart alternator cut-out V: | <11.4V, for 10 sec. (engine running, alternator not charging) or service battery voltage > starter battery voltage |
Suitable for battery types: | All 12V lead-acid batteries including: Wet, A.G.M, gel, calcium and maintenance free + LiFePO4 lithium batteries |
Max. power input from solar panel - Watts: | 300 |
Solar regulator type: | MPPT |
Cooling method: | Convection cooled |
Operating temperature range - °C: | minus 20 degrees C to plus 50 degrees C Automatic reduction of power at high ambient temperature. |
Power reduction: | 30 degrees C 16A, 50 degrees C 13A |
Enclosure class: | IP65 (splash and dust proof) |
Notes: | This charger can only be used with solar panels that have a peak voltage maximum of upto 23V. Please ensure that your panel is compatible before purchasing. |
Protections: | Temperature compensated charging, Reverse Polarity protection |
Certification: | Fully certified for use in vehicles |
Dimensions (L x W x H) - mm: | 192 x 110 x 65mm |
Product Net KG: | 1.047 |
Warranty - years: | 2 |
weight: | 1.1 |
C8664B
In Stock


CTEK M25 240V Battery Charger - 12V
PRODUCT CODE: | C8628 |
---|---|
Manufacturer's product code: | 40-202 |
MANUFACTURER: | CTEK |
Mains operating voltage - AC Volts: | 230 |
Nominal charging voltages - DC Volts standard charging port: | 12 |
Maximum continuous charging current - Amps: | 25 |
Suitable for battery types: | All types of lead-acid battery inc. wet, AGM and GEL and Lithium LiFeP04 |
Suitable for battery sizes - Ah: | 40ah - 500ah for Lead Acid, AGM & Gel, 30ah - 450ah for Lithium |
Selectable Charging Programs Lead‐Gel/AGM/Acid, LiFePO4: | Lead Acid, AGM and Lithium Programs |
Charging characteristic: | 8 stage IUoUp, with pulse maintenance mode. |
Number of charging outlets: | 1 |
Operating temperature rating - °C: | -20 - + 50 Degrees C. Automatic reduction of power at high ambient temperature. |
Cooling method: | Natural convection |
Protection Class / IP rating: | IP44 |
Temperature compensation: | yes |
Temperature sensor included: | yes |
Remote control option: | No |
Protections: | See manual |
Built-in charging monitor: | LED display |
Certification: | See manual |
Suitable for permanent installation: | yes |
Cable length supplied: | Charge cable length 4m, pre wired mains cable, 12v charge cable with M10 Eyelet connectors and temperature sensor |
Product Net KG: | 2.49 |
Warranty - years: | 5 |
weight: | 2.5 |
C8628
In Stock


CTEK MXS 10 Battery Charger - 12V
PRODUCT CODE: | C8622 |
---|---|
Manufacturer's product code: | 56-818 |
MANUFACTURER: | CTEK |
What's in the box: | 1 x Ctek 10;1 x temperature sensor;1 x wing nut terminal connector;1 x croc-clips connector;1 x user manual |
Mains operating voltage - AC Volts: | 230 |
Nominal charging voltages - DC Volts standard charging port: | 12 |
Nominal charging voltages - DC Volts Auxiliary charging port: | N/A |
Maximum continuous charging current - Amps: | 10 |
Max. Power consumption (AC): | N/A |
Suitable for battery types: | All types of lead-acid battery inc. wet, AGM and GEL. |
Suitable for battery sizes - Ah: | 20Ah - 200Ah for charging and up to 300Ah for maintenance. |
Selectable Charging Programs Lead‐Gel/AGM/Acid, LiFePO4: | Lead-acid/AGM |
Charging characteristic: | 8 stage IUoUp, with pulse maintenance mode. |
Minimum battery voltage required - Volts: | 2V |
Number of charging outlets: | 1 |
Operating temperature rating - °C: | -20 - + 50 Degrees C. Automatic reduction of power at high ambient temperature. |
Ambient temperature rating - °C: | N/A |
Cooling method: | Natural convection |
Silent Run Function: | N/A |
Protection Class / IP rating: | IP65 |
Temperature compensation: | yes |
Temperature sensor included: | yes |
Remote control option: | No |
Automatic Battery Regeneration/Li Auto Wake Up: | N/A |
Protections: | See manual |
Built-in charging monitor: | LED display |
Certification: | See manual |
Suitable for permanent installation: | Yes |
Dimensions L x W x H - mm: | 165 x 61 x 38 mm |
Cable length supplied: | Clamp connector 40cm, Eyelet connector 40cm, Prewired mains lead 1.9m, Pre wired cable ending in M6 connector 1.9m |
Product Net KG: | 0.8 |
Warranty - years: | 2 |
weight: | 1.105 |
C8622
In Stock

- Andy Badger, 14/01/2020
(Read all customer comments)
(Read all customer comments)
- Val & John , 13/07/2016
(Read all customer comments)
- Peter Edwards, 14/01/2020
(Read all customer comments)